Maintenance

You use the Maintenance page in the Manage category to perform basic maintenance.

The Maintenance panel lets you do the following:

• Upgrade...: Upgrade the device's software. Note that you can't upgrade a sensor if you are running it through a PC instance of GoPxL. For more information on upgrading a sensor's software, see Software Upgrade.
• Backup / Restore...: Back up and restore all saved jobs and recorded data. Note that backing up and restoring on a PC instance of GoPxL only affects the PC instance, not the sensor. For more information, see Backup and Restore.
• Factory Restore...: Restore the sensor (or the PC instance of GoPxL) to factory defaults. This erases all saved jobs and settings, as well as files created by tools such as Surface Pattern Matching and Surface Track. Performing a factory restore on a PC instance of GoPxL connected to a sensor only affects the PC instance, not the sensor; doing this also disconnects the sensor from the PC instance.
• Restart: Restart the sensor. Note that you can't restart a sensor running through a PC instance of GoPxL. To do this, you must remove the sensor from the PC instance; for more information, see Stopping Acceleration.