|
GoWebScan API
|
Core types and definitions.
Types | |
| struct | GoWebScanCalActivity |
| Represents a stage or activity in the system calibration processing pipeline. More... | |
| struct | GoWebScanCalNodeStatus |
| Represents a type of error or warning that occurred during system calibration processing of a node. More... | |
| struct | GoWebScanCalStatus |
| Represents the status of calibration processing for the system. More... | |
| struct | GoWebScanDataSource |
| Represents a type of sensor data. More... | |
| struct | GoWebScanDetectionStyle |
| Represents a style of triggering the start of an object when in detection mode. The start of an object is triggered by a minimum number of non-null profiles. The detection style can either be global, meaning the non-null profiles can be disconnected, or local, which imposes the condition than the non-null profiles are contiguous. More... | |
| struct | GoWebScanGenericPoint16s |
| Represents a generic 16s point. More... | |
| struct | GoWebScanInputAttr |
| Represents the attributes of an input GoWebScan message object. These values are copied from the raw sensor message stamp. Refer to GoStamp in GoSdk for more details. More... | |
| struct | GoWebScanInputId |
| Represents an ID for types of input messages. More... | |
| struct | GoWebScanInterpolation |
| Represents a style of interpolation used during profile resampling. More... | |
| struct | GoWebScanLinearFunction |
| Represents coefficients of a linear fit. The fit can be applied as follows: y(x) = c1*x + c0. More... | |
| struct | GoWebScanMode |
| Represents a scan mode. More... | |
| struct | GoWebScanMsgId |
| Represents an ID for GoWebScan message objects. More... | |
| struct | GoWebScanMsgStamp |
| Represents a message stamp containing properties of a message. More... | |
| struct | GoWebScanMsgType |
| Represents a type of GoWebScan message. More... | |
| struct | GoWebScanNodeTileId |
| Represents an ID for types of tile messages. More... | |
| struct | GoWebScanObstruction |
| Represents a user-defined obstruction to ignore a zone in X and Z in the input profile data. If there are any objects that regularly appear within the field of view of the sensors, such as chain runners, the zones in which those objects appear must be identified before the system will operate correctly in Calibration, Web, or Detection modes. More... | |
| struct | GoWebScanPlaneTileId |
| Represents an ID for types of plane tile messages. More... | |
| struct | GoWebScanSection |
| Represents a section of output system data. This can be defined by the user to allow for routing data to separate client destinations. More... | |
| struct | GoWebScanStage |
| Represents a stage in the processing pipeline. More... | |
| struct | GoWebScanSyncId |
| Represents an ID for types of sync list messages. More... | |
| struct | GoWebScanSystemPlane |
| Represents the top or bottom plane of the system. More... | |
| struct | GoWebScanTracheidPoint |
| Represents a tracheid point, which is the integer tracheid data for a spot with the X position (mils) taken from the matching profile data. More... | |
| struct | GoWebScanTracheidValue |
| Represents integer values of the spot tracheid data. These values are calculated from the spot shape. More... | |
| struct | GoWebScanXOrientation |
| Represents the direction of the X orientation. In a left-to-right system (as viewed from the front), the zero reference is on the left and sensor indices (defined by the sensor "Name" property) increase left-to-right. In a right-to-left system, the zero reference is on the right and sensor indices increase right-to-left. More... | |
| struct | GoWebScanYOrientation |
| Represents the Y-orientation of the sensors: Facing Toward (1) or Facing Away (0). The sensor logo and labels are visible when sensors are facing toward. More... | |